Wagstaff Piling has the most extensive fleet of driven piling equipment in Australia and has been an Australian leader in precast piling since its establishment. We have a long history of successful projects completed throughout Australia.
The company has permanent casting yards in Brisbane and Melbourne and is experienced in successfully establishing project-specific casting yards to meet the requirements of the project, including local procurement and employment objectives.
Wagstaff Piling is Australia’s leading provider of precast reinforced concrete segmental piles. The piles are manufactured in rigid forms in standard sizes of 235mm, 275mm, 300mm, 350mm, 400mm, 450mm square piles and 550mm octagonal piles. All piles are manufactured as segmental sections. The pile segments are easily handled and transported.
High strength mechanical joints are cast into the pile segments. The segments can be rapidly spliced in the field to achieve the required founding depth. Mechanical joints can be supplied in varying materials to suit the required design life. Rock shoes or plain shoes may be used depending on the ground conditions.
Wagstaff Piling owns and operates a wide range of driving rigs operating hydraulic hammers with hammer weights ranging from 1 to 16 tonnes.
Quality assurance standards apply to the whole production process. Efficient and rapid casting techniques provide an economical and robust pile for a variety of loads.
Prestressed concrete piles are generally an octagonal configuration and sizes vary from 450mm to 550mm.
Wagstaff Piling installs these piles either as a single length pile or a spliced pile.
Alternative cost-effective pile configurations can be designed and supplied by Wagstaff Piling incorporating octagonal prestressed or reinforced concrete piles spliced to reinforced concrete square segmental piles.
Wagstaff Piling can install a variety of steel section piles including, but not limited to, steel column sections, steel piles and steel tube piles. These piles can be installed using either hydraulically operated drop hammers or vibratory hammers.
Wagstaff Piling has developed techniques for installing micropiles for a variety of building and civil engineering applications, including restrictive horizontal and vertical clearance conditions. The micropiles can be steel piles, precast concrete piles or timber piles depending on the project design requirements and the site conditions.
Both hardwood and softwood timber piles can be installed using Wagstaff Piling driving equipment. Piles can be a single length or a spliced pile for deeper foundation solutions.